CSR 4.0 Bluetooth Dongle Dose not work after the my last. June 21, 2019 / in / by rocketek. CSR Bluetooth Dongle driver RKT-BT4B For Windows xp/7/8/10. 29881 Downloads. Download Now!. You can run this to see the status of the device "dmesg | grep -i blue". You can run this to see the tty and do the passthrough in the container "ls -ltr /dev/tty*|tail -n 1". Both in the unraid command line console. Then you create the passthrough in HA container like this. I have plugged in the UB400 into my USB port on my Windows 11 desktop to obtain Bluetooth capability. Under Bluetooth & devices, I do not see that bluetooth is enabled, and if I try and connect a device via bluetooth, it states that there is no bluetooth adapter on this device. In the device manager, there was no bluetooth device shown (I tried Consider a Bluetooth adapter that has an external antenna. While older adapters might work, they could have obsolete hardware or old firmware, which prevents reliable operation. Poor or outdated Bluetooth adapter firmware on the Bluetooth adapter: Update to the latest Bluetooth chip firmware on the Bluetooth adapter. Restart your computer then check if its working. Other things you can try include the Bluetooth troubleshooter. Open Start > Settings > Update & security > Troubleshoot. Scroll down to Bluetooth. Click Bluetooth then click Run the troubleshooter. When complete, Restart your computer. Press Windows key + X. 1. this is one of the bluetooth adapters that pretend to be a 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) and appears not to work despite the numerous existing workarounds in the kernel. 1304.304169] usb 3-6: new full-speed USB device number 6 using xhci_hcd [ 1304.454899] usb 3-6: New USB device found, idVendor=0a12 To download and install the TP-link Bluetooth driver automatically follow the steps: 1. Download and install Advanced Driver Updater. 2. Run the driver updating utility for Windows. 3. Click Start Scan Now and wait for the process to finish. 4. Thereafter click the Update driver option next to Bluetooth driver. Hi, The problem could be the aviator. Try updating its drivers in device manager. Also if it is truly an xbox 1s controller you should be able to connect it to the pc with bluetooth. Another thing could be is if the abdator is not from Microsoft then it might not work. Try usb too that is probably your best bet. Hope this helps, OreganKD. 1.Right click Bluetooth icon "Add Device", select Device and Printer/Add Device, search for the Bluetooth devices. 2.Place the headset in standby pairing mode. Once the headset is detected, click on the device and right click to select the connection. Note: If prompted to enter a key, please check the device manual or ask the supplier. ezOw.

csr bluetooth dongle not working